e 3 ds21218 rev. 7 - 2 1 of 3 gbj10005-gbj1010 www.diodes.com diodes incorporated features glass passivated die construction high case dielectric strength of 1500v rms low reverse leakage current surge overload rating to 170a peak ideal for printed circuit board applications ul listed under recognized component index, file number e94661 lead free finish/rohs compliant (note 4) single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25 c unless otherwise specified gbj10005 - gbj1010 10a glass passivated bridge rectifier case: gbj case material: molded plastic - ul flammability classification rating 94v-0 moisture sensitivity: level 1 per j-std-020c terminals: plated leads, solderable per mil-std-202, method 208 lead free plating (tin finish). polarity: molded on body mounting: through hole for #6 screw mounting torque: 5.0 in-lbs maximum marking: type number weight: 6.6 grams (approximate) mechanical data gbj dim min max a 29.70 30.30 b 19.70 20.30 c 17.00 18.00 d 3.80 4.20 e 7.30 7.70 g 9.80 10.20 h 2.00 2.40 i 0.90 1.10 j 2.30 2.70 k 3.0 x 45 l 4.40 4.80 m 3.40 3.80 n 3.10 3.40 p 2.50 2.90 r 0.60 0.80 s 10.80 11.20 all dimensions in mm _ b c d ee g h k j i l m n p r s a characteristic symbol gbj 10005 gbj 1001 gbj 1002 gbj 1004 gbj 1006 gbj 1008 gbj 1010 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average forward rectified output current @ t c = 110 c i o 10 a non-repetitive peak forward surge current, 8.3 ms single half-sine-wave superimposed on rated load i fsm 170 a forward voltage per element @ i f = 5.0a v fm 1.05 v peak reverse current @t c = 25 c at rated dc blocking voltage @ t c = 125 c i r 10 500 a i 2 t rating for fusing (t < 8.3ms) (note 1) i 2 t 120 a 2 s typical total capacitance per element (note 2) c t 55 pf typical thermal resistance, junction to case (note 3) r jc 1.4 c/w operating and storage temperature range t j ,t stg -65 to +150 c notes: 1. non-repetitive, for t > 1.0ms and < 8.3ms. 2. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 3. thermal resistance from junction to case per element. unit mounted on 150 x 150 x 1.6mm copper plate heat sink. 4. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7.
ds21218 rev. 7 - 2 2 of 3 gbj10005-gbj1010 www.diodes.com 0.01 0.1 1.0 10 0 0.4 0.8 1.2 1.6 1.8 v , instantaneous forward voltage (v) fi g .2 t y pical forward characteristics ( per element ) f i , instantaneous forward current (a) f t=25c j 0 40 80 120 160 180 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60 hz fi g . 3 maximum non-repetitive sur g e current t=150c j single half-sine-wave 10 100 1 1 10 100 c , total capacitance (pf) t v , reverse voltage (v) fi g .4 t y pical total capacitance, per element r f = 1mhz t=25c j 0.1 1.0 10 100 1000 02040 6080 100 120 140 percent of rated peak reverse voltage (%) fi g .5 t y pical reverse characteristics t = 150 c j t = 125 c j t = 100 c j t=25c j 0 2 4 6 8 10 12 25 50 75 100 125 150 i , average rectified current (a) o t , case temperature ( c) fi g . 1 forward current deratin g curve c resistive or inductive load with heatsink without heatsink
ds21218 rev. 7 - 2 3 of 3 gbj10005-gbj1010 www.diodes.com device packaging shipping gbj10005-f gbj 15/tube gbj1001-f gbj 15/tube gbj1002-f gbj 15/tube gbj1004-f gbj 15/tube gbj1006-f gbj 15/tube GBJ1008-F gbj 15/tube gbj1010-f gbj 15/tube notes: 5. for packaging details, visit our website at http://www.diodes.com/datasheets/ap2008.pdf. ordering information (note 5) important notice life support diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes witho ut further notice to any product herein. diodes incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on our website, harmless against all damages. diodes incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written appr oval of the president of diodes incorporated.
|
